Furuno FMD3100, Operator'S Manual

Page: 154 / 395

9. ROUTES
9-8
9.4.4 How to use the Alert Parameters page
The [Alert Parameters] page sets the alert conditions to use when checking a route.
Put a “W” for an item to highlight on the chart. ([Safety Contour] is fixed to “A” (Alarm).
If you do not require the highlight display for an item, put a “C” for that object. The rel-
evant alerts (Alarm, Warning, Caution) are shown in the [Check Results] page.
You can select the safety contour and chart alerts used to check the safety of the
route. This allows you to check the safety with conditions different from those chosen
for system use. This is useful when making a route for different loading or sailing con-
ditions.
Item Description Item Description
Check type Check how to apply the alerts,
to every leg or individual leg.
(Only [Draught] can be applied
to every leg.) Caution Area Caution area
Safety
Contour Set the safety contour (in me-
ters). Offshore
Production Area Offshore production area
UKC Limit Set UKC limit. Military Practice
Area Military practice area
Date (UTC) A chart may have date-depen-
dent features. Enter the actual
data of embarkation to know
date-dependent features. Seaplane
Landing Area Seaplane landing area
Check
Route but-
ton Check route for safe naviga-
tion, The results are shown the
[Check Results] page. Submarine
Transit Lane Submarine transit lane
Draught/m Ship’s draught Anchorage Area Anchorage area
Safety Con-
tour Safety contour MarineFarm
Aquaculture Marine farm aquaculture
Navigation-
al Hazard Navigational hazard. PSSA Area Particularly Sensitive Sea Area
Areas to be
Avoided Areas to be avoided No Vector Chart No vector chart for area
User Chart
Danger User chart danger area Too Many Dan-
gers Too many dangers area
Traffic
Separation
Zone Traffic separation zone UKC Limit Under keel clearance limit.
Inshore
Traffic Zone Inshore traffic zone Sounding UKC
Limit Under keel clearance limit.
Restricted
Area Restricted area Non-official ENC No official ENC data
Check a box to highlight the
corresponding chart alert area. Check a box to highlight the
corresponding chart alert area.