Furuno FMD-1712, Operator'S Manual

Page: 16 / 35

8
1.18 Menu Overview
The menu contains ten functions which
normally do not require frequent adjustment
in everyday operation. Basic menu
operation is as below.
Operating procedure
1. Press the [MENU] key to display the
menu.
ON OFF
ON OFF
OFF
SET ON M. DISP
0 1 2 3
PRESS
▲ / ▼
TO SELECT MENU
ITEM, TO CHANGE SETTING.
2
3
4
5
6
ECHO STRETCH
INT. REJECT
NAV DATA
VIDEO
WATCHMAN
DIMMER
PRESS
▲ / ▼
TO SELECT MENU
ITEM, TO CHANGE SETTING.
7
8
9
10
DSPL ON STBY
TRAIL TIME
TRAIL BRILL
RANGE (NM)
Press
▼
at DIMMER;
▲
at DSPL ON STBY to
change page. Default settings in highlight.
NAV OFF
CONT 30S
1M 3M 6M
LOW HIGH
ON
▲
▲
/
▲
▲
/
1/8 1/4 1/2 3/4 1 1.5
2 3 4 6 8 12 16 24
RVS NOM
1
Figure 1-16 Menu
(default settings highlighted)
2. Press or to select item.
3. Press or to select option.
4. Press the [MENU] key to register your
selection and close the menu.
Table 1-1 Menu description
Menu Item Description
1 ECHO
STRETCH Stretches echoes in
the range direction.
2 INT.
REJECT Suppresses radar
interference.
3 NAV DATA Turns the navigation
data display on/off.
4 VIDEO Displays echoes in
gray (NOM) or white
(RVS).
5 WATCHMAN Set at radar.
6 DIMMER Adjusts control panel
illumination.
7 DSPL ON
STBY Turns navigation data
display in standby
on/off.
8 TRAIL
TIME Selects target trail
plotting time.
9 TRAIL
BRILL Selects target trail
brilliance.
10 RANGE Selects ranges to use.
1.19 Control Panel Illumination
1. Press the [MENU] key to open the
menu.
2. Select DIMMER.
3. Select level desired; 3 is the highest
level of Illumination.
4. Press the [MENU] key to register your
selection and close the menu.