Furuno FM-4800 Operator'S Manual Download Page 26

Page: 26 / 135

FM-4800 Operator’s Manual

DIGITAL SELECTIVE CALLING

Step 4

Press and hold the

PTT

key to announce your situation.

All stations. (Repeat 3 times)

This is (Own ship name & call sign).

MMSI 123456789

Our position is 09°12.1234’ N, 123°45.1234’ E.

Cancel my DISTRESS ALERT

in 10/apr/2012 12:34

Step 5

Select "OK" to return to the home screen.

4.3.2

How to Receive a DSC Distress Call

Step 1

When a DSC distress call is received, the emergency alarm sounds.
Rotate the

Menu/DSC

control to stop the alarm.

Step 2

Optional: The display shows the MMSI of the vessel in distress. To show
additional information of the vessel in distress, select "INFO", and then
select "OK".

Step 3

To accept the distress call, select "ACCEPT".

The radio switches to CH16 automatically.

Note

If you press "CANCEL", the radio quits the automatic switching to
CH16 and reverts to the last selected working channel.

Step 4

Listen on CH16 for five minutes.

4.4 Individual Call

This feature allows you to contact a vessel with the DSC feature.

Summary of Contents for FM-4800








































































































































Search results

Summary of Contents for FM-4800

Reviews:

Brands by name

Popular brands

Furuno FM-4800, Operator'S Manual

Search results

Summary of Contents for FM-4800

Reviews:

Brands by name

Popular brands