manualshive.com logo in svg

Furuno FI-507 MULTI XL, Operator'S Manual

Share
Download
Furuno FI-507 MULTI XL Operator'S Manual Download Page 10

1. OPERATION

2

1.2

Turning the Power On/Off

To power the instrument,

 press the 

DISP

 key. All LCD segments go on 

and off and then the last-used display appears.

To power off the instrument, 

press the 

DISP

 and 

MODE

 keys together 

(about 7-10 seconds). The timer appears and counts down from three 
seconds to one second, and then the power goes off.

Power OFF sequence

1.3

Adjusting Brilliance and Contrast

1. Press the 

DISP

 and 

MODE

 keys together. The display for adjustment 

of brilliance appears, with current brilliance setting flashing.

2. Within seven seconds of completing step 1, press the 

APP/TRUE

 key 

to lower the brilliance, or the 

SELECT/CLEAR

 key to raise it.

3. Press the 

DISP

 and 

MODE

 keys together. The display for adjustment 

of contrast appears, with current contrast setting flashing.

4. Within seven seconds of completing step 3, press the 

APP/TRUE

 key 

to lower the contrast, or the 

SELECT/CLEAR

 key to raise it.

5. Press the 

DISP

 and 

MODE

 keys together to save the settings and 

restore normal operation.

The brilliance and contrast will be the same on all units which are syn-
chronized. (For how to synchronize units, see page 26.)

POWER

OFF

Press DISP

and MODE

keys together

    3

 POWER

    2

    1

 POWER

 POWER

Brilliance setting (flashing)

    

2

BRILL

Contrast setting (flashing)

    

3

CONT

Summary of Contents for FI-507 MULTI XL



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands