Furuno FCV-1100L Operator'S Manual Download

Page: 55 / 84

3. SYSTEM MENU

3-7

3.5

TEMP SETTING Menu

The TEMP SETTING menu sets up the water temperature sensor (FURUNO-
supplied sensor only).

DISP ALM TX/RX E/S

SYSTEM

Select temperature unit.

[-/+]: Change set, [EXIT]: Exit

TEMP SETTING

TEMP UNIT

TEMP INPUT

: SENSOR

TEMP ADJUST : +0.00

F (-20 +20)

TEMP OUTPUT : ON

TEMP READOUT: ON

TEMP GRAPH

: OFF

TEMP COLOR

: STD

TEMP SETTING menu

TEMP UNIT

Chooses unit of temperature measure, Celsius or Fahrenheit.

TEMP INPUT

Chooses source of water temperature data; sensor (FURUNO), or NMEA.

TEMP ADJUST

Offsets water temperature indication to improve accuracy. Effective only for
FURUNO-supplied water temperature sensor.

TEMP OUTPUT

Turn on/off water temperature data output.

TEMP READOUT

Turns on/off water temperature indication.

TEMP GRAPH

Turns on/off water temperature graph and chooses graph scale.

OFF: No water temperature graph

Summary of Contents for FCV-1100L





















































































Search results

Summary of Contents for FCV-1100L

Reviews:

Related manuals for FCV-1100L

Brands by name

Popular brands

Furuno FCV-1100L, Operator'S Manual

Search results

Summary of Contents for FCV-1100L

Reviews:

Related manuals for FCV-1100L

Brands by name

Popular brands