Furuno FAR 3220, Installation Manual

Page: 156 / 245

AP-18
APPX. 4 ALERT LIST
This radar provides aggregated header alerts for presentation of an aggregation on the AMS (Alert
Management System). The following table shows the aggregate header alerts along with the cor-
responding ALF alert number.
*: “

” indicates instance number.
Alerts which are not acknowledge within the set time limit are repeated as warning level, with the
exception of the Alert "Anchor Watch". The Alert "Anchor Watch" is escalated from waring level to
alarm level if the alert is not acknowledged within the set time. The default escalation time is as
follows. If you require to change the escalation time, see the Operator’s Manual.
• IEC62923-2 standard alert: 270 s (fixed)
• Other than IEC62923-2 standard alert: 60 s (adjustable)
• "Anchor Watch": 120 s (fixed)
The escalation time for "Anchor Watch" is based on IEC61174 and time limit cannot be
changed.
The table below lists the possible alerts for this radar. Each alert is listed with priority and category.
This radar can output alerts in ALF or ALR format. The alert number for each depends on the out-
put format and may differ.
Note 1: The ALR format is not BAM-compliant and shall not be used for new installations. It may
be used for retrofitting on ships-in-operation only.
Note 2: You can change the priority for some alerts to [Warning] from the [Chart Alerts] page (see
the Operator’s Manual).
Note 3: When this unit is assigned as a backup ECDIS, the following ALF alerts are output with
the EI talker. (3015, 3024, 3031, 3032, 3035, 3038, 10645, 10703, 10801, 13035)
Note 4: None of the alerts support responsibility transfer.
Priority: Alarm, Warning, Caution
Aggregated Alert Name ALF No.* Aggregated Alert Name ALF No.*
Critical Point 3038,

New Target 3048,

Target Capacity 3042,

Lost Target 3052,

3043,

Alert ID
Alert title Alert Message
Priority &
Category
ALF ALR
3042, 1 523 TT TGT Full (Au-
to) Cancel non-dangerous TT manually Warning
Cat: A
Meaning : 100% of capacity for automatically acquired TT is used.
Remedy : The number of acquired TT target became 100% of its limit. Stop track-
ing unnecessary TT targets.
3042, 2 525 TT TGT Full
(MAN) Cancel non-dangerous TT manually Warning
Cat: A
Meaning : 100% of capacity for manually acquired TT is used.
Remedy : The number of acquired TT target became 100% of its limit. Stop track-
ing unnecessary TT targets.