Furuno DRS6A X-Class, Installation Manual

Page: 20 / 73

2. INITIAL SETUP
5. Drag the [Menu Radar] sub menus to find the menu item [Radar Initial Setup].
6. Set the items referring to the table shown below
Menu Radar (Radar Initial Setup)
Menu item Description
[Antenna Rotation] Select the antenna rotation speed.
[Antenna Heading Align] See "How to align the antenna heading" on page 16.
[Main Bang Suppression] If main bang appears at the screen center, slide the circle
icon, while watching the radar echo on the left-side of the
display, until the main bang disappears.
[Enable Sector Blanking]/
[Enable Sector Blanking2] Up to two sectors may be selected for blanking (no trans-
mission). Select [ON] to enable this feature. Set the start
and end angles (0° to 359°).
[Antenna Height] Select the height of the antenna above the waterline.
[Antenna Longitudinal Po-
sition] Enter the antenna positioning bow-stern
(Longitudinal) and port-starboard (lateral)
position from the origin.
[Antenna Lateral Position (-
Port)]
[Auto Tuning] Enable/disable auto tuning for the connected radar.
[Tuning Source] Select the range to tune.
[Manual Tuning] Manually tune the radar. Not available when [Auto Tuning]
is enabled.
[Radar Monitoring] Display various information regarding the connected ra-
dar.
[Radar Optimization] Automatically adjust magnetron output and tuning for the
connected radar. Do not change these settings.
[ARPA Advanced Settings] Do not change these settings.
Title
Origin