Furuno DRS6A-NXT, Installation Manual

Page: 17 / 40

1. INSTALLATION AND WIRING
10
• Hoist the antenna unit slowly. If the antenna unit is hoisted too quickly, the
bracket can be damaged.
6. Place the antenna unit on the mounting platform with the BOW mark on the unit
aligned with the ship’s bow.
7. Secure the antenna unit, using the supplied flat washers (M12, 4 pcs), spring
washers (M12, 4 pcs), and hex. nuts (M12, 8 pcs).
8. Apply marine sealant to the flat washers, spring washers, and hex. nuts.
BOW mark BOW mark
Bow Bow
Flat washer
Spring washer
Hex. nut
Marine sealant
Corrosion-proof
rubber pad
Flat washer
Spring washer
Hex. nut
Stud bolt
Detailed view