Furuno DRS12A X-Class, Installation Manual

Page: 15 / 48

1. INSTALLATION AND WIRING
9
6. Hoist the antenna unit to the installation location, using two belt slings.
Note: When you hoist the antenna unit. keep in mind the following points:
• When you hoist the antenna unit, set two belt slings to the radiator bracket. Do
not set the belt slings to the radiator, the radiator may get damaged.
• Hoist the antenna unit slowly. If the antenna unit is hoisted too quickly, the
bracket can be damaged.
7. Place the antenna unit on the mounting platform with the BOW mark on the unit
aligned with the ship’s bow.
8. Secure the antenna unit, using the supplied flat washers (M12, 4 pcs), spring
washers (M12, 4 pcs), and hex. nuts (M12, 8 pcs).
Belt sling (2 pcs)
OK : Belt slings are set to the radiator bracket. WRONG : Belt slings are set to the radiator.
BOW mark BOW mark
Bow Bow
Flat washer
Spring washer
Hex. nut