3
Procedure
1.
Drill four pilot holes in the bulkhead (or tabletop) for the self-tapping screws.
2.
Screw two self-tapping screws (
5x20) into the pilot holes for upper, leave 5 mm protruding.
3.
Set unit onto the screws and fasten them.
4.
Tightly fasten the other two screws to fix the unit in place.
NOTE:
For mounting on a bulkhead, the connectors must face downward.
Wiring
Wiring Outline
The figure below shows the inserting position of each cables for the DFF3-UHD. Refer to the interconnection
diagram for details.
Inserting position of cables
Tabletop mount
Bulkhead mount
OK
NO
POWER
EXT-KP
NETWORK Transducer
Grounding terminal
Transducer
Seal nut
Super gland
Summary of Contents for DFF3-UHD
