Furuno CU-300, Operator'S Manual, Page: 16 / 28

7
2.3 Connection between Two Memory Card
Interface Units and Two Processor Units
Prepare the following cables and connectors:
• Commercial LAN cable (CAT5, STP, straight)
• Cable assy, MJ-A6SPF0014-010C/050C/100C/200C/300C (option for NavNet VX2)
• Converter connector, MJA6SERMD/TM11AP8-005 (option for NavNet VX2)
POWER
DATA 3 NETWORK CONT DATA 1 DATA 2
DJ-1
REMOTE FMD DISPLAY
RGB OUT
NTSC/PAL
2
GND
3
INPUT
12-24 VDC
1
CARD SLOT
3
2
1
GND
F.G.
12 VDC
OUTPUT
OPTION
0.3 A MAX
Ground
Ground wire
IV-1.25sq
(Local supply)
Power cable
MJ-A3SPF0026-050C or 100C
HUB
LAN cable
(CAT5, STP, straight,
local supply)
NavNet VX2-BB
Processor unit
Cable assy
MJ-A6SPF0014-010C/
050C/100C/200C/300C
(Option for NavNet VX2)
Converter connector
MJA6SRMD/TM11AP8-005
(Option for NavNet VX2)
POWER
DATA 3 NETWORK CONT DATA 1 DATA 2
DJ-1
REMOTE FMD DISPLAY
RGB OUT
NTSC/PAL
2
GND
3
INPUT
12-24 VDC
1
CARD SLOT
3
2
GND
F.G.
12 VDC
OUTPUT
OPTION
0.3 A MAX
Ground
Ground wire
IV-1.25sq
(Local supply)
Power cable
MJ-A3SPF0026-050C or 100C
NavNet VX2-BB
Processor unit
LAN cable
(CAT5, local supply)
Converter connector
MJA6SRMD/TM11AP8-005
(Option for NavNet VX2)