background image

3. ADVANCED SONAR OPERATION 

 

3-8

Each time the key is pressed the appearance of the event marks changes as 
below. Ten marks may be entered. When this amount is exceeded the oldest 
event mark is automatically erased. 

1

First press of the [EVENT] key

2nd press of the [EVENT] key

3rd press of the [EVENT] key

4th press of the [EVENT] key

This data is used to display latest
event mark data.

Past Event Mark

Latest Event Mark

2

1

3

2

1

 

Event marks 

3.6.2 

Entering an own ship position mark 

Operate the trackball to place the trackball mark on the own ship mark and press 
the [EVENT] key to inscribe an own ship position mark. 10 own ship position 
marks ( ) may be entered. When this amount is exceeded the oldest own ship 
position mark is automatically erased. 
 

3.6.3 

Deleting an event mark 

You may delete specific event mark as follows: 
 
1.  Operate the trackball to place the trackball mark on the event mark or own 

ship position mark you want to delete. The color of the mark changes from 
white to red if the trackball mark is correctly placed. 

2.  Press the [DELETE MARK] key to delete the mark. 
 
 

Summary of Contents for CSH-5L/CSH-8L


























































































Reviews: