Furuno CSH-53 Operator'S Manual Download

Page: 57 / 108

7-3

Target lock mark appearance

The size and thickness of the target lock mark indicates fish speed
and tracking status, as shown below.

Meaning

Target lock
mark appearance

Mark size indicates
relative speed.

Fast
Medium
Slow

(More than 5
Tx cycles)
(Up to 3 Tx
cycles)

Mark thickness shows
tracking status.

Figure 7-3 Target lock mark appearance

Erasing target lock mark

Target lock marks may be erased as follows:

1. Open the sub panel 2.

2. Select DELETE MK.

3. Press the [+] key for DELETE MARK FISH.

Choosing target lock mode

Two types of target lock are available: target mark and fish.

Target mark: Tracks the target lock mark, changing range and
tilt angle according to ship’s movement. The fish school itself is
not tracked.

Fish tracking: Tracks fish schoolís horizontal movement, chang-
ing range and tilt to track movement.

Do the following to select target lock type:

1. Open the sub panel 1.

2. Press the [MENU] key while pressing the up arrow key in

sub panel 1 to display the SYSTEM menu.

3. Select TARGET LOCK, and then press the [MENU] key.

Summary of Contents for CSH-53













































































































Search results

Summary of Contents for CSH-53

Reviews:

Related manuals for CSH-53

Brands by name

Popular brands

Furuno CSH-53, Operator'S Manual

Search results

Summary of Contents for CSH-53

Reviews:

Related manuals for CSH-53

Brands by name

Popular brands