Furuno CN-24, Service Manual

Page: 53 / 90

7-5
17) Confirm that the voltage at TP4 changes from 9 to 1 volts
"Temporal storing the full scale data of 4/5 curve"
18) Set the oil pressur to 164 8 kgf/ cm
2
, and keep it by a step 22.
19) Set DIP switches S1 and S2 as follow
S1 #1 #2 #3 #4 #5 #6 #7 #8
on off off on X X X off
S2 #1 #2 #3 #4
off off off off
20) Confirm that the LED lights up from blinking.
"Temporal storing the "0" data of 5/5 curve"
21) Confirm that the oil pressure is 164.8 kgf/ cm
2
.
22) Set the DIP switches S1 and S2 as follow;
S1 #1 #2 #3 #4 #5 #6 #7 #8
off on off on X X X off
S2 #1 #2 #3 #4
off off off off
22) Confirm that the voltage at TP4 changes from 9 to 1 volt.
"Temporal storing the full scale data of 5/5 curve"
23) Set the oil pressure to 206 kgf/ cm
2
, and keep it by a step 25.
24) Set the DIP switches 51 and S2 as follow
S1 #1 #2 #3 #4 #5 #6 #7 #8
on on off on X X X off
S2 #1 #2 #3 #4
off off off off
25) Confirm that the LED lights up from blinking.
"Storing all data (1/5 to 5/5) into NVRAM"
26) Set DIP switches S1 and S2 as follow
S1 #1 #2 #3 #4 #5 #6 #7 #8
off off on on X X X off