manualshive.com logo in svg

Furuno BR-500, Operator'S Manual

Share
Download
Furuno BR-500 Operator'S Manual Download Page 19

1.  MAIN ALARM PANEL

1-9

1.9

Help Area

The help area displays alerts related to system failures, operational events, operation 
help, etc.

1.9.1

System failure indications

This section describes how system failures are given and the accompanying operation 
flow.

1. The help area shows system failure messages in white (warning level alerts have 

a flashing yellow background, alarm level alerts have a red flashing background), 
along with the respective alert number and icon. The alert number differs depend-
ing on the Alarm Mode chosen at installation. To change the Alarm Mode settings, 
consult a FURUNO technician. Only the alert with the highest priority is displayed 
in the help area. All other alerts are listed on the [Active Alert] list and [Alert Log] 
screens. (See paragraph 1.9.2.)

2. The buzzer at the Main Alarm Panel sounds.
3. Press any key on the Main Alarm Panel to stop the buzzer and acknowledge the 

alarm.

4. For any system error, contact a FURUNO sales representative or service techni-

cian for advice.

The tables below show the alert messages, along with their respective alert icon and 
alert number, in order of priority.

Legacy Mode

AlertI/F1 Mode and AlertI/F2 Mode

Alert no. & Indication

Problem

Measures

010 Failure: Communication Communication failure between 

Processor Unit and Main Alarm 
Panel

Consult a FURUNO technician.

011 Failure: AC

AC power to the unit is interrupted 
or stopped.

Check power to the unit, check 
cabling and connections to the 
unit.

012 Failure: DC

DC power to the unit is interrupted 
or stopped.

Check power to the unit, check 
cabling and connections to the 
unit.

Alert No. & Indication

Problem

Measures

250 COM ERR with 
Processor Unit

Communication failure between 
Processor Unit and Main Alarm 
Panel

Consult a FURUNO technician.

(220*

1

)001 DC Power 

Failure

DC power to the unit is interrupted 
or stopped.

Check power to the unit, check 
cabling and connections to the 
unit.

(220*

1

)002 AC Power 

Failure

AC power to the unit is interrupted or 
stopped.

Check power to the unit, check 
cabling and connections to the 
unit.

220003 BNWAS Alarm is 
1st Stage *

2

Watch alarm is at first stage

Press any key on the Main 
Alarm Panel, or press the 
Timer Reset Panel button.

Summary of Contents for BR-500






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands