Furuno 9ZWWR2120, Installation Manual

Page: 20 / 67

S2E-17-0209_IM_WR2120_C
16
4. PRECAUTIONARY ITEM
1) Use only single phase 100-240VAC commercial power supply.
2) DO NOT overhaul or modify.
3) DO NOT work on during electrical storm.
4) DO NOT scratch, cut, forcedly bend, pull, twist, bundle, or damage the power cable. Also do not
put heavy items on top or around.
5) DO NOT touch inside equipment with a wet hand.
6) Connect ground conductor for equipment protection and electric shock prevention from lightning
induction and ground leakage.
7) Cleaning instructions: Use dry soft cloth to wipe the surface. If it is difficult to remove stains use
the cloth soak with a neutral detergent to clean surfaces. Please DO NOT use an alcohol or an
organic solvent (e.g.: thinner) to clean surfaces.
8) When install the radar stand, level of stand should be within ±0.2 degrees.
Radar stand
ATU
Leveling ±0.2°
(Radar)
Leveling ±2°
(Radar stand)
Figure 4.1