C16AK0009 REV.1
SLIMBOX-V, INDOOR ENCLOSURE-24F
ISSUE DATE 8/5/2016
pg. 13
2.
Follow the enclosure installation steps from the paragraph entitled “Wall installation
instructions (paragraph 2)
3.
Cut an entry port rubber grommet following the molded in notch until you reach the
center of the molded hole. Thread drop cable through the he just created opening. Use
the cable aramid yarn, “L” bracket and cable ties to restrain the cable. If you use a cable
with a strength member, use the anchor brkt. to restrain the cable. You may move the
anchor bracket. to lower part of the enclosure base to comply with your installation
requirements
4.
Store splice protectors and cable slack in the splice trays. If you use splitters, store them
in the splice trays as well.
5.
Record the connection information on the destination sheet and insert the sheet into the
document holder located on the inside wall of the cover
6.
Assemble the cover to the base
