INVISILIGHT NIU MODULE ASSEMBLY INSTRUCTIONS
M13AK0007 9/30/2013
6.
Remove the tabs on the side ports where the microduct or InvisiLight fiber enters the base through
the port.
7.
The fiber idenfication should be filled in on the label and secured to the inside cover.
8.
Customer choice but you can remove the tabs on one side or the other of the cover and use the
screw attachment to secure the enclosure. If you prefer not to use the screw then both sides of the
enclosure tabs will be needed to keep the cover closed.
9.
Place the InvisiLight fiber per the instructions M13AK0008. The Connectorized fiber spool will
be placed on the spool holder on the base of the module and then the fiber will exit the base from
one of the side ports. The inside end connector will attach to the adapter on the opposite side as the
blown fiber connector.
10.
Close the Cover and secure the unit with the Cover Screw.
NVSLGHTC-WCC MODULE E/W SCA ADAPTER
301092193
