INVISILIGHT NIU MODULE ASSEMBLY INSTRUCTIONS
M13AK0007 9/30/2013
This document describes the assembly instructions for the InvisiLight NIU Module. The enclosure is
comprised of multiple components including the cover, base, adapter, six cable ties, and anchor hardware.
Instructions
1.
Open the package and find the wood screws from the accessories package.
2.
Place the base on the wall where you want to mount the enclosure and secure the base. If
microduct is entering the module then it will have to be attached prior to mounting the enclosure.
3.
Tape the duct so that some of the tape is past the edge of the duct. Attach the duct into one of the
six ports and secure with the cable ties.
4.
Secure the base to the wall using the wood screws and anchors, attaching at a secure point to the
wood joints..
5.
Complete the blown fiber process in the microduct and secure the connector into the adapter.
