S179A Quick Reference Guide
FTS-B526
Issue 2
①
Turn on power.
< Fiber Preparation >
Stripping of fiber coating
Fiber Stripper
Fiber Cleaning
Fiber Cleaving
Lint-free
tissue with
ethanol
Place fiber on Single
Fiber Adapter.
Hold the fiber tightly.
Then move stripper into
the direction indicated
by the arrow mark.
Safety Instructions
Before operating this device, please consult the user manual for safety
instructions. These guidelines will enable you to operate the product in a
safe and correct manner in order to prevent harm to yourself and others.
Single Fiber Adapter
Splicing Procedure
End.
⑫
Remove the fiber.
⑪
Press
key or icon.
⑩
Transfer fiber to heater.
⑨
Slide protection sleeve over
splice point.
⑧
Remove spliced fiber.
⑦
Press
key or icon.
⑥
Set fibers in splicer.
⑤
Prepare the fibers.
④
Insert protection sleeve.
③
Perform Arc Check.
※
Please see “Arc Check” for
details.
②
Select applicable program.
Setting the fiber on the splicer
The edge of the fiber coating should
match with the edge of the tight holder.
Edge of the coating
Press lever.