7
Operation
Fan Control
Press the fan button once to turn on the
fan, press twice to turn off. (Fig. 9)
Fig. 9
Light Control
Press the light button once to turn on the
light, press twice to turn off. (Fig. 10)
Fig. 10
Electrical Requirements
Observe all governing codes and ordinaces.
Ensure that the electrical installation
is adequate and in conformance with
National Electrical Code, ANSI/NFPA
70 (lastest edition), or CSA Standards
C22.1-94, Canadian Electrical Code, Part 1
and C22.2 No. 0-M91 (lastest edition) and
local codes and ordinances.
If codes permit and a separate ground
wire is used, it is recommended that a
qualified electrician determine that the
ground path is adequate.
Wire sizes and connections must
confirm with the rating of the appliance
as specified on the model/serial/rating
plate. The model/serial/rating plate is
located inside the range hood. Wire sizes
must confirm to the requirements of the
National Electrical Code, ANSI/NFPA
70 (lastest edition), or CSA Standards
C22.1-94, Canadian Electrical Code, Part
1 and C22.2 No. 0-M91 (lastest edition)
and local codes and ordinances.
Recreational vehicle fan units.
Do not operate any fan with a damaged
cord or plug. Discard fan or return
to an authorized service facility for
examination and/or repair.
