Furrion FEHS29E7A User Manual Download Page 6

Overview of remote control

General Description

8

7

1.Set your LED TV set

Put your LED TV set in a firm place 
that can bear its weight.
To avoid danger, please do not expose 
the LED TV set to water or heat (such 
as a light, candle, or heating machine). 
Do not block the ventilation on the 
back of the LED TV set.

2.Connect antenna and power
a

.Connect the antenna cable to the 

antenna socket on the back of the 
LED TV set and to your antenna socket.

b

.Plug in the power cord of the LED 

TV set (AC 100-240V  50/60Hz).

c

.When the television receiver is not 

used for an extended period of time, 
it is advisable to disconnect the AC power 
cord from the AC outlet.
The MAINS plug or an appliance coupler 
is used as the disconnect device, 
The disconnect device shall remain 
readily operable.

3.Turn on the set

 

If the LED TV set is in standby mode 
(the light is red), press the POWER 
button on the remote control to turn 
on the set.

NOTE

Picture  only  for reference 

10

cm

10

cm

10

cm

Install

 

LED

 

SET

General Description

  

POWER: 

Turn the TV on or off

.

MUTE: 

Press to mute the sound, Press again to regain 

the sound.

0-9: 

Press 0-9 to selet a TV channel directly The channel

will change after 2 seconds. Applicable for entering page
number in teletext mode and so on.

-/--:

 Press this button firstly when the channel to be 

selected is two or three figures (only DVD mode).

RETURN: 

Return to the previously viewed program.

P.MODE: 

Select the picture mode.

S.MODE: 

Select the sound mode.

SOURCE: 

Press to select signal source for TV.

VOL+/-: 

Press these two buttons to increase/decrease the

sound volume.

CH+/-: 

Press these two buttons to change channels

sequently. 

▲▼

◀▶

/enter: Allows you to navigate the on-screen                 

               menus and adjust the system settings to your 
               preference.

EXIT: 

Exit from the menu or sub menu.

MENU: 

Allow you to navigate the on-screen menus.

EPG:

 Press to display EPG (Electronic Program Guide) in 

formation.

INFO: 

Displays the channel in formation.

ZOOM: 

Press to change the screen scale.

MTS: 

Press to select the audio channels.

LOCK: 

Press to display the parental menu.

TIME: 

Press to display Time menu.

FREEZE: 

Press to freeze the screen.

CC: 

Press to display the closed caption. 

LIST: 

Press to display the TV program list.

FAV:

 Press to display the favorite programs.

ADD: 

Add this program to the favorite language.

ERASE: 

Delete this program from the favorite channels 

list.

FAV+/-: 

Press this /- the favorite program list.

SLEEP: 

Set up the time how long the TV will turn off.

ANT  75 

TV

 

signal

AC 100-240V
  50/60Hz

Summary of Contents for FEHS29E7A















Reviews: