6
Installation
English
This section explains the installation of the
new appliance before using it for the first
time. We recommend reading the following
tips.
WARNING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is the same
height as the rest of the flooring. This surface should be
strong enough to support a fully loaded refrigerator, or
approximately
294 Ibs (133 kg)
.When moving, be sure
to pull out and push back the unit in straight.(Fig. 1)
Fig. 1
Location and Ambient Room
Temperature Limits
It's essential to find a suitable place to locate
your new appliance to ensure its efficient
operation. Please consider the following
instruction for your appliance:
• Install the appliance in a dry and low
moisture area. The best range of ambient
temperature for the appliance is 55 °F to
110 °F.
• Keep the appliance away from heat
sources, such as stoves, fireplaces or
heaters .
• Keep the appliance out of direct sunlight
and rain.
Class
Symbol
Ambient
Temperature
range(°F)
Extended
Temperate
SN
50 to 90
Temperate
N
61 to 90
Subtropical
ST
61 to 100
Tropical
T
61 to 109
Leveling of Appliance
For proper leveling and to avoid vibration,
this appliance is provided with adjustable feet
in front. Please adjust the level by following
below instructions: (Fig. 2)
1. Roll the refrigerator into place.
2. Turn the adjustable feet (with your fingers
or a suitable spanner) until they touch the
floor.
3. Tilt the top backwards about 25/64-19/32
inches (10-15 mm) by turning the feet
1-2
turns further. This will allow the
doors to self-close and seal properly.
4. Whenever you want to move the
appliance,
remember to tum the feet
back up so the appliance can roll
freely. Reinstall the appliance when
relocating.
Front roller
Rear roller
Adjustable foot
Fig. 2
