7
English
8. Replace the top and bottom vents to the refrigerator.
Make sure the releasing tabs on back of the each are fully
inserted into the slots. (Fig. 11 Fig. 12 and Fig. 13)
Fig. 11
Fig. 12
Fig. 13
9. The refrigerator is now fully installed into the enclosure.
(Fig. 14)
Fig. 14
Electrical Connection
WARNING
The rear of the refrigerator cooling system has hot surfaces
and sharp surfaces that can damage electrical wiring.
Make sure there is a good clearance between all electrical
wiring and the cooling system of the refrigerator.
Position any electrical wiring within the refrigerator
enclosure opposite the burner side of the refrigerator. Do
not put any electrical wiring through the roof exhaust vent.
Failure to correctly position electrical wiring can result in
electrical shock or fire.
The refrigerator operates on the following energy sources:
115-volt AC -
(132 volts maximum - 108 volts minimum)
NOTE:
If a DC power source is to be connected, please use
a genuine Furrion designed/authorized power inverter to
change the 12V DC power to AC 115V/60Hz.
Operation out of these limits can damage the refrigerator
electrical components and will void the warranty.
Wiring Diagram
