11
Operation
Running a Channel Scan
To receive maximum number of
channels, a channel scan is required
once the antenna and power supply have
been correctly installed and all cables
have been properly connected.
A new scan might find any new channels
that have been added in your area or find
any channels that have been changed or
moved since the last scan.
NOTE:
Antenna reception may vary
based on transmitting antenna tower
height, lobe pattern of the transmitter,
height of the receiving antenna, weather
conditions and terrain on receiving path,
including trees, buildings and hills.
The steps to perform a channel
scan may vary between televisions
or compatible devices. Always run a
channel scan in the following situations:
●
Anytime the antenna is moved or
enters a new region
●
Anytime a channel is lost.
Selecting TV Antenna
Reception
To receive TV antenna reception, press
the ON/OFF switch and the power
indicator will be lit.
*
Power
Indicator
ON OFF
Satellite
TV 1
ON = TV
OFF = Cable
Power
Indicator
ON OFF
Satellite
TV 1
ON = TV
OFF = Cable
Selecting Cable TV
NOTE:
The vehicle must be connected to
an external cable source.
To receive cable TV, press the ON/OFF
switch and the power indicator will be
turned off.
**
Power
Indicator
ON OFF
Satellite
TV 1
ON = TV
OFF = Cable
Power
Indicator
ON OFF
Satellite
TV 1
ON = TV
OFF = Cable
*, **
Skip the step of pressing the ON/OFF
switch when a KeyTV system is installed.
