7
Operation
Your Furrion wall thermostat has been
preprogrammed with factory default
settings. Review the settings below and
adjust to your comfort level.
FACTORY SETTINGS
HEATING
68ºF / 20ºC
COOLING
72ºF / 22ºC
FAN SPEED
AUTO
MODE
COOL
FURNACE DIFFERENTIAL
2ºF
Turn On/Off the Thermostat
To turn On
Press and hold button for 3 seconds to
turn on the thermostat. The thermostat
LCD will be illuminated and the factory
settings will be displayed on the LCD for
first time use.
NOTE:
The LCD will display the
last setting if you have changed the
parameters.
To turn Off
Press and hold button for 3 seconds
to turn off the thermostat.
Only the current room temperature will
be displayed on the LCD.
Temperature Format
Simultaneously press both
and
buttons for 3 seconds to toggle the
temperature format between Centigrade
and Fahrenheit.
NOTE:
ºF indicates Fahrenheit and ºC
indicates Centigrade.
Operation Mode
After the thermostat is turned on, press
button repeatedly to toggle through
the available modes. The activated mode
icon and temperature set-point will be
displayed on the LCD. The thermostat
will transmit the last selected operation
mode command to the control box after
2 seconds without any operation.
Depending on the system installed, there
