9. To adjust the sound equalizer curves
To adjust the sound equalizer curves, briefly and repeatedly press the
SEL/EQ
button to select the sound equalizer curves BAS(without preset EQ),
TRE (without preset EQ), BAL(L I R),
LOUD ON/OFF,VOL LAST/DEFA,
BEEP ON/OFF, LOCAL/DX, STEREO/MONO, SUBW ON/OFF, CL XX XX.
Rotate
VOL Knob
to select audio feature.
10. ZONE 1/ZONE 2 BUTTON
Pressing and hold
ZONE 1 / ZONE 2
button will turn on or off the audio source
in each of the different areas which your speakers are connected,
the corresponding zone number will display on the LCD once it is selected.
Note: The ZONE 2 has independent audio output control function.
*Short-press
ZONE 2
button to active independent audio selection mode, the
icon
"
ZONE 2
"
flashes on the LCD.
*Select the media source(USB,AM/FM,BT,F AUX,R AUX ,AV),adjust audio effect
and preset EQ independently.
* After your setting of audio output of ZONE 2, Short-press
ZONE 2
button
back to ZONE1 audio output control mode. The icon
"
ZONE 2
"
will not flash.
If the media source of ZONE 2(ZONE 1) selected AM/FM,F AUX,R AUX,AV, the
media source of ZONE 1(ZONE2) can be selected USB,BT,AM/FM,F AUX,
R AUX and AV.
If the media source of ZONE 2 (ZONE 1) selected USB, the media source of
ZONE 1(ZONE 2) can be selected USB,AM/FM,F AUX,R AUX and AV.
If the media source of ZONE 2 (ZONE 1) selected BT, the media source of
ZONE 1(ZONE 2) can be selected AM/FM,F AUX,R AUX and AV.
11. To reset the unit
when the display is incorrect, or the function buttons are not effective or
sound is distorted, then use a sharp point to press the
RESET
button, that
will make the unit be reset to factory default and re-instate the correct functions.
PAGE 13
