11
Installation
Installing the Rooftop Unit
CAUTION
●
The rooftop unit weighs
approximately 100 pounds (45
kg). To prevent back injury, use a
mechanical hoist when lifting or
moving the unit. Failure to obey this
warning could result in injury.
●
Do not slide unit. It may damage
the gasket at the bottom of the
rooftop unit and cause leakage.
●
Do not grasp the ventilation slots to
lift the rooftop unit up.
1. Grasp the bottom of two sides of the
unit, lift and position the rooftop unit
into the prepared opening using the
gasket at the bottom of the rooftop
unit as a guide. (Fig. 1)
Roof Opening
This Side is
Facing Forward
Fig. 1
This completes the outside installation
of the rooftop unit. Minor adjustments
can be done from inside of the RV if
required.
Installing the Wall
Thermostat (model:
FACW12SA-BL/FACW12PA-
BL/FACW12ZA-BL,
sold separately)
There are 3 types of wall thermostat for
you to select.
●
FACW12SA-BL: Single zone basic
wall thermostat
●
FACW12PA-BL: Single zone premium
wall thermostat
●
FACW12ZA-BL: Multi zone wall
thermostat
Based on the wall thermostat version
you selected. Please refer to the
separate instruction manual on how to
install the wall thermostat to the RV.
