Using the On-Board Computer
6
Turning On Your Aventa
Hold down the
‘MODE’
button and the display will switch on and light up (if
you’ve
remembered to switch on your battery first
…
).
Hold down the
‘MODE’
button again and the display switches off.
Battery Capacity
The battery indicator will show 5 full bars when fully charged. When the last bar is reached, the battery
level is low and requires prompt recharging
Switching On The Headlights and Backlights
Press the
‘UP’
button for a few seconds to turn on the headlight and the backlight. The lighting indicator
symbol will appear on the screen to show that the light is currently ON
Power Assistance Selection
Use the
‘UP’
and
‘DOWN’
buttons to change the assistance provided by the Motor
. ( 1
–
5 )
Walk Assist Mode
Press and hold the
‘DOWN’
button for 2 seconds and your e-bike motor will start to run at a uniform speed of 6 Km/h.
Distance And Different Speed Indicators
Tap
“MODE”
to toggle between riding distance (TRIP) and total distance (ODO) as well as to toggle the speed indicator to display
‘Current Speed’, ‘Average Speed’
and
‘Maximum Speed’
Changing The Settings
Press the
‘UP’
and
‘DOWN’
buttons at the same time for 2 seconds to access the settings. Tap
‘Mode’
to select the setting, use the
‘UP’
and
‘DOWN’
buttons to change the settings. Hold
‘M’
to confirm.
Setting 1
–
UNIT (KPH/MPH) Setting 2
–
Maximum speed Setting 3
–
Wheel Size
Summary of Contents for AVENTA
Page 1: ...AVENTA EN FR ...