background image

This  series  is  our  latest  generation  kitchen  equipment.  They  are 

fully–featured,  easy  to  operate,  energy  saving  and  are  designed  for 

environmental protection. 

Thank you for choosing our kitchenware series. Please read the manual 

book carefully before using the equipment and use only as specified. 

1.Attention for 

installation

 

a. Put the equipment on level ground and ensure a clearance of at least 

10cm from both right and left side, and at least 20cm from behind. 

b. The working voltage must match the one on the specification plate. 

c. Install the allowable power source; fuse plug and grounding protection 

to the equipment. Do not put anything in front of the power switch. 

d. The power connection is under the equipment in the rear corner and 

connects to ground for safety. 

e. The ground wire (yellow and green wire) and power source wire are in 

the  samewiring  harness.  Connect  the  ground  wire  by  suitable  copper 

bolt if the power point doesn’t have one.   

structure

 

1.Appearance is made of stainless steel, easy to keep clean. 

2.With adjustable foot which can control the distance from the barbecue 

to the oven. 

3.Optional nuzzle used for different types of gas. 

4.High heat efficiency, handiness and simple maintenance. 

Summary of Contents for FSGSD-0905






Reviews: