7
OPERATION
NOTE:
The manual button on the firebox unit will not provide you with all the function
control, and its purpose is to control some basic function when you lose the
remote handset. Please use the remote handset to carry out all functions.
POWER BUTTON:
Power ON/OFF.
FLAME BUTTON:
Press once till the digital tube displays “F0”, this is the flame colour
selection. Press up or down to cycle between the colour selection. F0-F9 will be displayed
on the display as the flame colour changes.
Press twice till the digital tube displays “C0”, which is the colour selection of charcoal fire.
Press up or down to cycle between the colour selection. C0-C9 will be displayed when in
colour cycle selection.
Note: Hold flame till the digital tube displays “E0”, when E0 is displayed, you can press up
or down to select E0 or E1.
E0 means that the ERP weekly timer and window detection function is not turned on.
E1 means ERP weekly timer and window detection can be set to on. The SET setting
indicator will flash as long as the flame button is pressed.
HEATING BUTTON:
Press once to turn on low heating mode. Press twice for high
heating mode, press 3 times to turn heating off. (Remark: For the heating to operate the
indoor temperature must be lower than the set temperature.)
Power
Heating
Flame
Timer
Up
Down
