09-23-2016
Page 4/5
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
STEP 5: Attach the support legs with leveler to the slats.
Adjust the levelers on bottom of support legs when
necessary.
Support Leg
Leveler
This End Up
Slat
Wood Screws (E)
STEP 6: Arrange slats on the slat bearers
and then lay decking on top of the slats.
Make sure the slats are positioned along the
seams of the decking as shown in the detail
in STEP 7 under the pre-drilled hole.
Remove the decking and attach slats to the
slat bearers with wood screws (E).
STEP 7: Put the decking over the slats, secure decking to the slats with wood screws (G) through
the pre-drilled holes in the decking as shown below.
Decking
Slat
Decking
Decking
The slat should support
both pieces of decking.
Decking
Decking
Decking
Make sure that there is a slat
under the pre-drilled hole.
G
Decking
Pre-drilled hole
ITEM NO: IKJ-400-KD Queen Sleigh Bed HB
IKJ-412-KD Queen Panel HB
IKJ-402L Queen Side Rails
IKJ-403D Queen
St
orag
e
FB
All manuals and user guides at all-guides.com
