CUBO CUB-CU412-FP
4
For assembly advice or parts go to www.compacfurniture.co.nz or call 0800 100 858
STEP THREE: Install Hardware in the DIVISIONS
•
Take the DIVISIONS and lay them with the holes facing UPWARDS.
•
Install four
H2 CAMS
in each Division.
Ensure that the arrow on the top of each Cam points to the
unfinished edge.
……………….
STEP FOUR: Install Hardware in the BACK PANEL
•
Take the BACK PANEL and lay it with the holes facing UPWARDS.
•
Install four
33 RAFFIX FITTINGS
into the BACK PANEL. Ensure that the Open End of the RAFIX FITTING is
facing the edge of the BACK PANEL.
You may need a hammer to tap these into place. Ensure they are
straight.
H33 Rafix Fitting
H2 Cams
Summary of Contents for CUBO CUB-CU412-FP
Page 1: ...Job No...
