PRODUCT CARE & MAINTENANCE
Aluminium Frame Information
The majority of frames are mainly produced from aluminium, with the main benefit being a
light weight product for easier use. Some designs require steel to be used in certain sections
for added strength. While aluminium is rust resistant, bare metal can show signs of oxidation
(red film) this does not constitute rust. Simply you are able to wipe or sand surface to remove
oxidation mark.
Note you will need to touch up affected area with paint to stop from reoccurring. Steel itself
has a lower resistance to elements than aluminium and will show signs of rust as it ages.
Limited exposure & maintenance are best solutions for adding life to any furniture used in
outside areas.
Aluminium Frame Maintenance
Use a bucket filled with warm water & a soft soap, sponge over frame till clean, once clean
rinse off with a hose, pat dry with a soft clean cloth before use. Every 4-6 weeks.
Note when cleaning if you find scratches in paint, please cover with a suitable paint to prevent
oxidation.
Cushions
Rotate cushion if possible to share the wear, take in cushions when not in use & stored in a
dry area. Should cushions get wet, please hang over chair frame to drip dry completely before
using or storing. Cushion and sling fabric fading resulting from general wear and tear or from
a failure to comply with these care and maintenance instructions are not covered under the
warranty. Mould & mildew of cushions & slings is caused through atmospheric conditions, such
as damp or poorly ventilated areas please check regularly for dampness.
