ASSEMBLY STEP 2 –Fit Nuts to Long Bolts
Once all long bolts & Table legs are fitted. Take nut [E] with washer [D] and by hand fit nut to
long bolt end poking thru table leg. Ensure nut is seated correctly before tightening. Then take
tool [H] fit over nut and tighten nut till firm. Note do not overtighten as may cause damage to
threads. Repeat for all legs. Move to step 3
ASSEMBLY STEP 2 –Fit Leg Cover
You may need a rubber mallet or a hammer and block of soft wood. Take leg cover [F] aline
over hole in bottom of leg. Take note of diagram for positioning of leg adjuster [G] which is
already fitted in leg cover. Take your fist, rubber mallet or hammer with block of wood and
gently tap to fit leg cover, note stop when all corners are flat. Repeat for all legs.
Assembly complete. With the help of another person gently lift table into air and turn till feet
can touch the ground. Take care of extension piece when moving table. Go to operating
instruction
