5
OPERATION OF EXT. INSTRUCTIONS
Please note that to extend table there are two (2) locks engaged at factory. They are located
under the table past the slide action, you will need to get under table to locate the first time.
As shown diagram it is a toggle black in colour to release pull down and to lock push up. I
recommend that all whom may operate this function be shown what is required to use ext.
function.
Once both toggles are in the down position you can now open and close as desired.
Opening please stand in centre of table and with two hands one (1) on each of the edges of the
table, pull top towards you and walk slowly backwards both section of the top work on a pulley
system and one person can operate if required. Two is best. Ensure you extend fully.
Go to next page for more instructions.
