ASSEMBLY INSTRUCTIONS
Hardware #6
=
10pcs
STEP10
ASSEMBLY IS COMPLETED
Make
sure
the product is rested on a flat surface and does not feel loose or wobbly. If it does, double
check that the bolts/screws are secured and properly tightened.
Extend the two outer slides of the runners so
that they are align with the sides of the drawer.
Make sure the pre-drilled holes from the
drawer align with the screw holes of the outer
slides. Secure two screws from the inside of
the drawer using a Phillips screwdriver to
tighten them to the outer slides. Repeat the
process for securing the
remaining
drawer
s
.
Page 12
of
12
6
I
K
J
J
J
B
A