Page 5 of 5
I.
Align the legs (#2) with the pre-
drilled holes on the corners of
the base (#3).
II.
Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#B) onto the bolt (#C)
and then the flat washer (#A)
onto the SAME bolt (#C), in
that order.
III.
Insert the bolt assemblies
through the pre-drilled holes of
the corners of the base (#3)
and secure those bolts using
the Allen wrench (#D) to lock
them with the legs (#2).
#A x 4 pcs
#B x 4 pcs
#C x 4 pcs
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
I.
Carefully place the table top (#1)
facing down on a protective
surface.
II.
Align the legs (#2) assembled onto
the base (#3) with the pre-drilled
holes on the bottom corners of the
table top (#1).
III.
Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#C) and then the
flat washer (#A) onto the SAME bolt
(#C), in that order.
IV. Insert the bolt assemblies through
the pre-drilled holes on the bottom
corners of the table top (#1) and
secure those bolts using the Allen
wrench (#D) to lock them with the
legs (#2).
V.
Carefully turn the completed table
upright. Make sure the table is
rested on a flat surface and does
not feel loose or wobbly. If it does,
double check that the bolts/screws
are secured and properly tightened.
#A x 4 pcs
#B x 4 pcs
#C x 4 pcs
ASSEMBLY IS COMPLETED
Summary of Contents for Verona CM4484E
Page 3: ...Page 3 of 5...
