1. Align the bottom panel (#3)
to the bottom corners of
the legs (#2). Note, the
support leg should be facing
up. Have another person
hold the bottom panel (#3)
in place then place 2 brackets
(#F) along each corner.
2. Prepare 8 bolt assemblies by
first inserting a lock washer
(#J) onto the bolt (#B) then
a flat washer (#I) onto that
same bolt (#B), in that order.
Insert the bolt assemblies
into the corners and secure
using the Allen wrench (#H).
Place the glass top (#5)
onto the table top (#1).
Carefully turn the
completed table
upright. Make sure
the table is rested
on a flat surface
and does not feel
loose or wobbly.
If it does, double
check that the
bolts are secured
and properly
tightened.
ASSEMBLY IS COMPLETED