Page 7 of 7
I.
Carefully place the end table top
(#4) facing down on a protected
surface. Align the two right legs
(#6R) with the pre-drilled holes
on the right corners of the end
table top (#4).
II.
Prepare 8 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#A) and then
the flat washer (#C) onto the
SAME bolt (#A), in that order.
III.
Insert the bolt assemblies
through the pre-drilled holes on
the right corners of the end table
top (#4) and secure those bolts
using the Allen wrench (#E) to
lock them with the right legs
(#6R).
IV.
Repeat the process above to
assemble the two left legs (#6L)
onto the end table top (#4).
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
I.
Align the end table shelf (#5)
with the pre-drilled holes on the
right legs (#6R) and the left
legs (#6L).
II.
Insert 4 screws (#D) into the
end table shelf (#5) using the
Phillips screwdriver to lock
them with the right legs (#6R)
and the left legs (#6L).
III.
Carefully turn the completed
table upright. Make sure the
table is rested on a flat surface
and does not feel loose or
wobbly. If it does, double
check that the bolts are
secured and properly tightened.
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
#D x 4 pcs
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND END TABLE.
#6R
#6L
Summary of Contents for Lincoln Park CM4702-3PK
Page 3: ...Page 3 of 7...
