1. Align the pre-drilled holes on
the base (#4) with the pre-drilled
holes on the leg stand (#3).
2. Insert two bolts (#A) and secure
using the Allen wrench (#E). Repeat
process on the other leg stand (#3).
#4
1. Insert the bolt (#D) into
the top pre-drilled holes,
turn right to tighten.
2. Insert one end of (#6) and
(#5) into one leg stand,
then the other ends into
the other leg stand.
3. Apply a washer (#C)
then hex nut (#H) onto
the other ends of the
bolts (#D) and secure
using the wrench (#I).
4. Insert 2 bolts (#B) into each
bottom corner of the leg
stands and secure using
the Allen wrench (#E).
