I.
Insert the front leg support
(#4) between the 2 front legs
(#3). Then insert the 2 side
leg supports (#5) into the
backrest with legs (#1) and
the 2 front legs (#3).
II.
Align the 2 front legs (#3)
with the pre-drilled holes of
the seat (#2).
III. Insert FIRST the flat washer
(#D) onto the threaded stud
of the front legs (#3) and then
the lock washer (#E) onto the
SAME stud, in that order.
Secure the hex nut (#C) onto
the same stud using the
wrench (#H) to tighten the
parts together.
Page 5 of 5
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR.
Turn right (clockwise) to tighten
I.
Secure the front leg support
(#4) and the 2 side leg
supports (#5) with 6 screws
(#G) using a Phillips
screwdriver to lock them with
the backrest with legs (#1)
and the 2 front legs (#3).
II.
Carefully turn the completed
bench upright. Make sure the
bench is rested on a flat
surface and does not feel
loose or wobbly. If it does,
double check that the
bolts/screws are secured and
properly tightened.
#G x 6 pcs
#C x 4 pcs
#D x 4 pcs
#E x 4 pcs
Turn right (clockwise) to tighten
Summary of Contents for Dickinson CM3187PBN
Page 2: ...Page 2 of 5 ...
