1. Carefully place the headboard (#1) onto the top of the H/board legs (#2).
2. Prepare 6 bolt assemblies by applying a lock washer (#C) onto the bolt (#A)
then a flat washer (#D) onto that same bolt (#A). Insert 3 bolt assemblies into
each end of the headboard (#1) and secure using the Allen wrench (#E).
6
6
6
1. Insert 2 threaded studs
(#G) into the holes along
the sides of the headboard
(#1) and footboard (#4).
Turn right to tighten.
2. Apply the each
end of the side
rails (#5) onto
those threaded
studs (#G).
3. Apply a hex nut (#H)
then a beveled
washer (#I) onto the
threaded studs (#G).
Secure the washer
using the wrench (#J).
