Backside
Page 5 of 5
Turn right (clockwise) to tighten
Adjust the leveler according to the
ground level. To lower or to raise the
center leg, turn the leveler clockwise
or counterclockwise, respectively.
I.
The two mirror support rails (#2) are already attached behind the dresser (#3).
Position the mirror support rails (#2) vertically to align with the pre-drilled holes of
the dresser (#3) AND the mirror (#1).
II. Prepare 6 bolt assemblies by inserting FIRST the lock washer (#C) onto the bolt
(#A) and then the flat washer (#B) onto the SAME bolt (#A), in that order. The
other 2 bolt assemblies are already attached to the mirror support rails (#2) from
the factory.
III. Insert the bolt assemblies onto the mirror support rails (#2) and secure those
bolts using an Allen wrench (#D) to lock with the dresser (#3) AND the mirror (#1).
IV. Tighten all bolts, including those that were already attached from the factory.
Backside
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
ASSEMBLY IS COMPLETED
Summary of Contents for CM7970D
Page 3: ...Page 3 of 5 ...
