2. Align the bracket along the
headboard up connect (#9)
to the headboard up tube
frame (#10). Insert a bolt
(#D) and secure using the
Allen wrench (#F).
3. Place the slats
(#5) onto every
other slot along
the side rails.
4. Apply a flat washer
(#1) onto the bolt
(#D), then place the
slats (#16). Insert
bolts from below and
secure using the
Allen wrench.
#C x 2pcs
#D x 11pcs
#I x 6pcs
1. Align the headboard up tube frame (#10) to the
top of the headboard supports (#7,8) then insert
2 bolts (#D) into each end. Align the headboard
up connect (#9) and insert a bolt (#C) into each
end. Secure using the Allen wrench (#F).
1. Align the headboard frame (#11)
to the holes as displayed, then
insert a bolt (#E) into each top end.
Secure using the Allen wrench (#F).
2. Insert a bolt (#A) into each
bottom end. Secure using
the Allen wrench (#F).
