Furniture of America CM7941TR, Assembly Instructions

Page: 4 / 5

Page 4 of 5
I. Align the slat (#4) with the
pre-drilled holes on the back
of the front panel (#1) AND
the rear panel (#3).
II. Secure 2 screws (#E) into the
ends of the slat (#4) using a
Phillips screwdriver to tighten
them with the front panel (#1)
AND the rear panel (#3).
III. Repeat the process to
assemble the remaining 5
slats (#4) onto the front panel
(#1) AND the rear panel (#3).
I. Align the two side panels (#2)
with the pre-drilled holes on the
back of the front panel (#1).
II. Prepare 4 bolt assemblies by
inserting FIRST the lock washer
(#C) onto the bolt (#A) and then
the flat washer (#B) onto the
SAME bolt (#A), in that order.
III. Insert the bolt assemblies
through the pre-drilled holes of
the side panels (#2) using the
Allen wrench (#D) to lock them
with the front panel (#1).
IV. Repeat the process above to
assemble the other ends of the
two side panels (#2) onto the
rear panel (#3).
Turn right (clockwise) to tighten
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs
#E x 12 pcs
Turn right (clockwise) to tighten