.
Align the ends of the 4 assembled slat (#8) with the pre-drilled
holes on each side of the side rails (#6). Secure two wood
screws (#E) for each slat (#8) by using a Phillips screwdriver to
tighten them down to the side rails (#6).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 7 of 7
Enlarged
Enlarged
#E x 8 pcs
Align the threaded end of the slat support leg (#9) with the pre-
drilled holes of the slat (#8) and tighten by hand until secured.
Repeat the process for attaching the remaining 3 slat support
legs (#9) onto the slats (#8).
ASSEMBLY IS COMPLETED
Adjust the leveler
according to the ground
level. To lower or to
raise the slat support leg,
you need to turn the
leveler clockwise or
counterclockwise,
respectively.
Summary of Contents for CM7811Q
Page 2: ...Page 2 of 7 ...
