1. Align (#4,5,9) to the holes indicated, then insert
the bolts shown. Secure using the Allen wrench.
2. Place the slats (#11,12)
onto the slots, then insert
a bolt (#B) with washer (#K)
into each hole from below.
Secure using the Allen wrench.
3. Align the legs (#13)
to the holes, then
insert the bolts (#C).
1. Insert the rods (#A) into
the wheel covers (#8).
Turn right to tighten.
2. Insert the rods (#A) into
the wheels (#7), then
into the legs. Insert the
bolts and screws
indicated and secure.
