Turn right (clockwise) to tighten
Page 5 of 7
#C x 8 pcs
#D x 8 pcs
#E x 8 pcs
Due to the size and/or weight of this product, it is highly
recommended that the assembly should be done near the
area of its intended location. Make sure you have enough
space to move around during the assembly. ALWAYS have
at least two people to help with transporting and assembling
the product to avoid any potential injury and/or damage.
I.
Align the two feet (#5) onto the pre-drilled holes on the bottom
corners of the headboard (#1).
II.
Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#E) onto the bolt (#C) and then the flat washer (#D) onto the
SAME bolt (#C), in that order.
III.
Insert the bolt assemblies through the holes of the feet (#5) and
secure those bolts using the Allen wrench (#H) to lock them with
the headboard (#1).
IV.
Repeat the process above to assemble the remaining two feet
(#5) onto the footboard (#3).
Summary of Contents for CM7008F
Page 3: ...Page 3 of 7...
