#A x 4 pcs
#D x 4 pcs
Align the legs (#2) with the pre-drilled holes on the base
(#3). Insert a bolt (#A) through each of the legs (#2) and
secure those bolts using the Allen wrench (#C) to lock them
in with the base (#3).
Turn right (clockwise) to tighten
Page 7 of 8
#A x 4 pcs
I.
Align the leg support (#4)
with the pre-drilled holes on
the center of the legs (#2).
II.
Insert 4 bolts (#A) through
the pre-drilled holes on the
leg support (#4) and secure
those bolts using the Allen
wrench (#C) to lock them in
with the legs (#2).
III.
Align the threaded end of
the glides (#D) with the pre-
drilled holes on the bottom
of the legs (#2) and tighten
by hand until secured.
Turn right (clockwise) to tighten
Summary of Contents for CM4777-3PK
Page 2: ...Page 2 of 8...
